1. The shape of the supporting unit: There are square and circular series of supporting units, which can be selected according to the purpose.
2. The support seat can provide multiple sizes: support end (BF, EF, FF), fixed seat (EK, BK, FK), which can provide maximum support in limited space.
3. The support unit on the supporting side uses deep groove ball bearings: the internal bearings of the support unit are filled with an appropriate amount of lithium soap based grease and sealed with special sealing gaskets, which can be directly installed and used for a long time.
4. Adopting the most suitable bearing: The fixed side support unit is equipped with pre pressure adjusted JIS5 grade angular contact ball bearings. Especially in the ultra small models of EK6 and EK8, ultra small angular contact ball bearings with a contact angle of 45 ° developed for ultra small ball screws can achieve high rigidity, high precision, and stable rotational performance.
5. Small size and easy installation: The support unit is a small structure that considers the surrounding installation space; At the same time, due to the installation of bearings that have been pre pressed through body adjustment, they can be directly transferred without further processing. Therefore, reduce
Assembly time can also improve assembly accuracy.
6. Interchangeability: All support seats have undergone standardized processing and are completely interchangeable, reducing design troubles.
